Maker Pro
Maker Pro

Connect two USB slave

D

Davy

Jan 1, 1970
0
Hi all,

AFAIK, connecting two USB slave requires 3 chips:
Controller chip + USB host chip + USB hub chip.

But the 3 chips consume a lot of areas.
Can you recommand any chip includes these 3 chips or 2 of the chips?

Best regards,
Davy
 
R

Rich Webb

Jan 1, 1970
0
Hi all,

AFAIK, connecting two USB slave requires 3 chips:
Controller chip + USB host chip + USB hub chip.

But the 3 chips consume a lot of areas.
Can you recommand any chip includes these 3 chips or 2 of the chips?

If you really feel that it is necessary to post identical messages to
multiple groups, it would be very helpful if you would "cross-post"
instead of "multi-post."

When you cross-post, a single message-ID is assigned. Good usenet client
software can use this ID to display the posting to readers only in the
first group where it is encountered and simultaneously to include
replies from all groups. Very handy and it keeps the answers to your
questions from being spread all over.

Of course, "good usenet client software" probably excludes the evil
Google usenet interface.
 
Top