Connect with us

Computer power from 12-14 v car input.

Discussion in 'Electronic Design' started by Joe Plane, Oct 13, 2003.

Scroll to continue with content
  1. Joe Plane

    Joe Plane Guest

    Does anyone know of a prebuilt unit (without going to 120V AC then
    back to 12V) that can output the voltages (+- 12v, +-5v, 3.3v)
    necessary for a computer that uses a car's 12-14v range?
  2. Spajky

    Spajky Guest

    making it by yourself?

    -- Regards, SPAJKY
    & visit site -
    Celly-III OC-ed,"Tualatin on BX-Slot1-MoBo!"
    E-mail AntiSpam: remove ##
  3. Rein Wiehler

    Rein Wiehler Guest

    look at this place under powersupplies

  4. Also, try and click on DC-DC power.

    @@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@,@@[email protected]@[email protected],@@[email protected]@[email protected]@[email protected]@
    ###Got a Question about ELECTRONICS? Check HERE First:###
    My email address is whitelisted. *All* email sent to it
    goes directly to the trash unless you add NOSPAM in the
    Subject: line with other stuff. alondra101 <at>
    Don't be ripped off by the big book dealers. Go to the URL
    that will give you a choice and save you money(up to half). You'll be glad you did!
    Just when you thought you had all this figured out, the gov't
    changed it:
    @@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@@
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day