Connect with us

Composite video to component?

Discussion in 'Electronic Design' started by mkr5000, Nov 12, 2012.

Scroll to continue with content
  1. mkr5000

    mkr5000 Guest

    I'd try it but have a long cable run so want to ask --

    can you view composite video on a component connection? I know the green input has the picture "info" -- maybe if I connect the composite to the green input. I'll see "something"?

    Don't care about quality or audio -- just want to see the video (it's a video output for a preamp setup with the remote).

    Probably can't be done but worth asking.

    I can use an rf modulator for the coax input if not.
     
  2. cameo

    cameo Guest

    I am running my TV that way from the composite video of digital
    converter cable box and get monochrome picture with the yellow composite
    video cable connected to the Y component input.
     
  3. josephkk

    josephkk Guest

    It will probably work as sync on green seems to be most common. Still the
    modulator may be a better deal in the end.

    ?-)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-