Connect with us

Component identification

Discussion in 'Datasheets, Manuals and Component Identification' started by Bill D, Jun 3, 2017.

Scroll to continue with content
  1. Bill D

    Bill D

    Jun 3, 2017
    G'day All Y'all, I have no background in electronics but I like to tinker. I hate being beaten by systems designed to be difficult, near impossible to repair or with a designed limited life.
    I'm currently playing with an automobile Remote which has a built in immobiliser. This remote is designed so that once it is programmed or paired with a particular car, it can't be reprogrammed or paired with another car. I believe I have identified the component which prevents the reprogramming however, I don't know what it is.
    Could someone please look at the photos attached and tell me what it is?
    Many thanks for your time,
    Bill D.

    Attached Files:

  2. davenn

    davenn Moderator

    Sep 5, 2009
    if you are referring to that raised square black thing .... that is an inductor and not responsible

    the immobilisation will be done within the programming of the main chip .... the largest of those 2 chips that can be seen
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day