Maker Pro
Maker Pro

Component ID

Peter24

Feb 11, 2017
2
Joined
Feb 11, 2017
Messages
2
Hi all.
I'm trying to diagnose an issue with the reciever in my bait boat. It basically has no range at all.

Could anyone tell me what the gold coloured component underneath where it says an on the board underneath the crystal.
Thanks
 

Attachments

  • 20170210_191700.jpg
    20170210_191700.jpg
    200.2 KB · Views: 108

davenn

Moderator
Sep 5, 2009
14,260
Joined
Sep 5, 2009
Messages
14,260
Could anyone tell me what the gold coloured component underneath where it says an on the board underneath the crystal.

it's a capacitor ... cant tell the value from your pic
what is written on it ?

OHHHH ... it doesn't look faulty ... I doubt that it is your problem
 

Peter24

Feb 11, 2017
2
Joined
Feb 11, 2017
Messages
2
I can't make out what's written on it... it's to small or my eyes are no good.
I'm guessing that's not causing my range issues. Any ideas of anything else I can check.......
 
Top