Connect with us

comparator

Discussion in 'Electronic Components' started by [email protected], Jul 5, 2006.

Scroll to continue with content
  1. Guest

    Need a comparator that will operate with a common mode input at the
    positive rail. Something that will survive long-term in an automotive
    environment. Seek suggestions on comparators that I can find in dual
    or quad, through-hole or SMT.
     
  2. Wouldn't be easier to resistively scale the inputs so you don't need to
    be at the rail?

    GG
     
  3. Guest

    Well, it would actually be easier not to have to do that!
     
  4. RHRRC

    RHRRC Guest

    certainly scaling the inputs is good and cheap but could use the
    LM339/LM393 quad/dual comps anyway in an auto environment
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-