Connect with us

compaq presario 324t

Discussion in 'Electronic Repair' started by peter hancox, Mar 1, 2004.

Scroll to continue with content
  1. peter hancox

    peter hancox Guest

    Hi! anyone got schematics for this monitor?
    ht rustles up and tube filaments light up but hear relay click and no
    raster, on turning up g2 still get black screen g2 at 10v probably goes up
    if input signal is detected from pc
     
  2. Jamie

    Jamie Guest

    do you have a video signal into it ?
    if not you most likely will never see an image.
    if so then maybe the video sense switch is defective.
    ...
    and it also could be the on board video processor.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-