Connect with us


Discussion in 'Electronic Basics' started by John, Aug 21, 2004.

Scroll to continue with content
  1. John

    John Guest

    I am looking for a basic single spindle hobby type 3 axis CNC that will
    allow me to rout up to 3.2mm FR4, Balsa and Ply wood (UK ish).
    I know Milinst do a nice machine but they stress LIGHT engraving only.
    Any help gladly received.
  2. Tim Auton

    Tim Auton Guest

    You could look at one of the small metalworking mills (Taig and
    Sherline are the big names). They are a whole lot more expensive than
    the Milinst offering, but would laugh at a bit of FR4 or ply. You
    might need a faster spindle than those used for metalworking though.

  3. Jeff

    Jeff Guest lots of home build machines there. I've a 12"x12"x6"
    that cost me about $260..
  4. John

    John Guest

    Thanks Guys.
    We (UK) seem to be a bit further behind you guys in this arena, Google has
    come up with a lot of answers to sift though.
    Does anyone have any personal recommendations?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day