Connect with us

Circuit help with rc car

Discussion in 'General Electronics Discussion' started by Jackm, Feb 23, 2015.

Scroll to continue with content
  1. Jackm

    Jackm

    2
    0
    Feb 23, 2015
    I want to change how the lights act on my rc car, usually when I go forward the lights come on until I stop and when I reverse the same thing happens with the tail lights, I want to change it so when it's on the headlights come on and the outside tail lights come on and when I reverse the inside taillights go on, I can take close up photos of specific components if you need me to, I'm not an expert at electronics but I'm learning.
     

    Attached Files:

  2. KrisBlueNZ

    KrisBlueNZ Sadly passed away in 2015

    8,393
    1,268
    Nov 28, 2011
    Hi Jack! (Don't shout that too loud at an airport)

    Welcome to Electronics Point :)

    Can you post some photos of the main circuit board. One of the underside, like you already posted but of the board only, looking directly at the board from above the centre, and edit it to show what the wires connect to, and another of the other side of the board, also from directly above. See https://www.electronicspoint.com/resources/how-to-take-photos-of-circuit-boards.6/ and https://www.electronicspoint.com/resources/photos-with-phones.27/ for guidelines on how to take good photos that will help us.
     
  3. Jackm

    Jackm

    2
    0
    Feb 23, 2015
    Ok I unscrewed the circuit board and but I can really only identify the resistors and that there are some capacitors so I can't really label sorry, but Im pretty sure the blue red and black ones are the important ones for this job, I also took some photos of the lights in case they help
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-