Maker Pro
Maker Pro

Circuit design

RodrigoVelazquezEspinosa

Nov 19, 2018
1
Joined
Nov 19, 2018
Messages
1
I need help to obtain the actual values of resistances and capacitance of the circuit on the picture below.
 

Attachments

  • 1.jpg
    1.jpg
    85.7 KB · Views: 30

Ylli

Jun 19, 2018
401
Joined
Jun 19, 2018
Messages
401
I don't see anything that needs to be changed. At least not without knowing more about the transfer characteristics of the IR/photo transistor arraignment.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Multiply all the values by 1. That should be close enough.
 

Audioguru

Sep 24, 2016
3,656
Joined
Sep 24, 2016
Messages
3,656
The input voltage to the first opamp never goes positive, then its output also never goes positive. Its input is 0V or is driven negative. All the circuits shown on Google use an inverting opamp that produces a positive output when the input capacitor causes its input to go negative, or biases the (+) input of the first opamp at half the supply voltage so that it is an amplifier.
 
Top