Connect with us

circuit board modification

Reply to Thread

Discussion in 'General Electronics Discussion' started by delphidude, Aug 9, 2013.

Scroll to continue with content
  1. Aug 9, 2013 #1
    delphidude

    delphidude

    4
    0
    Aug 9, 2013
    I have purchased a LOL Rollover Toy and wanted to modify it so that it doesn't shut off after the 10-15 seconds of laughing. I have disconnected the electric motors from the board but am not sure how to change it to stay on laughing as long as the power switch is on?
     
  2. Aug 9, 2013 #2
    Raven Luni

    Raven Luni

    798
    7
    Oct 15, 2011
    Probably a software timer - not alot you can do with that. Youd be better retriggering it - maybe stuck a relay on the power connection and a circuit to detect power off
     
  3. Aug 9, 2013 #3
    delphidude

    delphidude

    4
    0
    Aug 9, 2013
    not sure about the software part

    i uploaded the images i just took.
     

    Attached Files:

  4. Aug 9, 2013 #4
    delphidude

    delphidude

    4
    0
    Aug 9, 2013
    Just guessing at things...

    I have been doing some research trying to figure out what these things do and how they might relate to a timer/switch. Am I guessing in the right ballpark about the 100uF 10v Capacitor might be what is doing the timing and cutoff of the power?
     
  5. Aug 9, 2013 #5
    delphidude

    delphidude

    4
    0
    Aug 9, 2013
    Got it...

    Removed that capacitor and jumpered the connection. go figure.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. circuit modification

  2. Newbie circuit modification

  3. Tachometer Signal Modification Circuit Help

  4. inverter generator modification.

  5. Guitar Amp Modification

  6. Guitar Amp Modification

  7. Thumb joystick modification...

  8. Guitar Amp Modification

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-