Connect with us

Choosing the right MCU

Discussion in 'Electronic Components' started by [email protected], May 11, 2005.

  1. Guest

    Hi,

    I'm looking for an MCU for a central control unit (need
    SPI+I²C+UART+some I/O). Amost every manufacturer has a suitable MCU
    for this application (Atmell, microchip, TI, ST, ...).

    But what i'm looking for is
    1) An MCU that can easily be programmed in circuit (few extra
    components).
    2) A FREE C-compiler with >4K program space. (most important)

    Any ideas ???

    Greets,
    Johan
     
  2. Jeroen

    Jeroen Guest

    f>or this application (Atmell, microchip, TI, ST, ...).
    Yes, AVR. Almost any AVR has ISP, basically no more than a 6 or 10 pins
    header. WinAVR is a free C compiler.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-