Connect with us

choosing a microcontroller

Discussion in 'Microcontrollers, Programming and IoT' started by [email protected], Feb 15, 2011.

Scroll to continue with content
  1. sapna.dudani@gmail.com

    [email protected]

    7
    0
    Feb 15, 2011
    hii

    I m working on a voltmeter project its input voltage range is 33kv, with 100v resolution, i want to choose a microcontroller with inbuilt adc
    10 bit resolution
    512 bytes ram
    1 kv flash
    28 i/os
    minimum 4 a/d channels...

    i went through the microchip family and selected PIC16F1516 but it is having so many extra peripherals which i dont need can nyone suggest me a microcontroller other than this....
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,419
    2,790
    Jan 21, 2010
    You can just ignore the other peripherals that you won't be using.
     
  3. sapna.dudani@gmail.com

    [email protected]

    7
    0
    Feb 15, 2011
    thank you..
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-