Chipper Check KIT 2 schematic

[Andy Cuffe]

Does anyone know where I can find a schematic of the Thomson Chipper
Check CCF002 upgrade kit "KIT 2"? I'm working on a DTV306 which
requires this upgrade to the chipper check. This kit is no longer
available.
Andy Cuffe

[email protected] <-- Use this address until 12/31/2005

[email protected] <-- Use this address after 12/31/2005

 

[[email protected]]

Who are you trying to order it from?
Thomson parts distributor or Fluke?

Thomson gave Fluke exclusive distribution rights to the Chipper Checker
some time ago.

 

[Andy Cuffe]

Who are you trying to order it from?
Thomson parts distributor or Fluke?

Thomson gave Fluke exclusive distribution rights to the Chipper Checker
some time ago.

I'm going by what's on Thomson's web site. Apparently the kit used to
be free, but now they say you have to buy a Chipper check II. Based
on the installation instructions, the kit looks very simple. I just
need to know what in on the small PCB included.
Andy Cuffe

[email protected] <-- Use this address until 12/31/2005

[email protected] <-- Use this address after 12/31/2005