Connect with us

Chicken/Egg Question

Reply to Thread

Discussion in 'Microcontrollers, Programming and IoT' started by alfa88, Jan 26, 2013.

Scroll to continue with content
  1. Jan 26, 2013 #1
    alfa88

    alfa88

    349
    7
    Dec 1, 2010
    1st. off I'm a newb. with microcontrollers. I've got a Parallax Basic Stamp that I literally blew the dust off of. I was experimenting with turning on and off LEDs and found out that 2 ports were bad. I then found out that the processor in a BS2 is a PIC 16F57. The chip is relatively cheap but here's my dilemma: if I were to replace said chip would it then need to be programmed for my BS2 to work?
     
  2. Jan 26, 2013 #2
    (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,505
    2,852
    Jan 21, 2010
    Yes..
     
  3. Jan 26, 2013 #3
    CocaCola

    CocaCola

    3,635
    5
    Apr 7, 2012
  4. Jan 26, 2013 #4
    alfa88

    alfa88

    349
    7
    Dec 1, 2010
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. light sensor chicken door

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-