Connect with us

cheap microcontroller with CAN?

Discussion in 'Electronic Components' started by Susanne Fischer, Apr 29, 2004.

Scroll to continue with content
  1. Hi.

    Does anyone know some simple and cheap microcontroller with two
    RS232-interfaces and perhaps also a CAN-interface?
    Often you can get a cheap mc but have to pay a lot for the development
    tools which are of course needed to write software for the
    microcontroller.

    Has anyone an idea for a microcontroller with also free or cheaply
    available dev kit?

    Thank you for your answers in advance,
    Susanne Fischer
     
  2. Tim Wescott

    Tim Wescott Guest

    You haven't checked the Microchip and Atmel websites? I know that
    Microchip has a PIC with CAN. They also have a small CAN controller
    that works on SPI, so you can add it to many microprocessors.
     
  3. CBarn24050

    CBarn24050 Guest

    Has anyone an idea for a microcontroller with also free or cheaply
    fujitsu do several flash/can micros, mb90540 for example. Softune development
    system is usually free, they also do some starter kits with most of the code
    allready written for you.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-