Connect with us

Chartplotter - Radar connection

Discussion in 'Datasheets, Manuals and Component Identification' started by michaelm110, Feb 27, 2010.

Scroll to continue with content
  1. michaelm110

    michaelm110

    1
    0
    Feb 27, 2010
    I have a Standard Horizon CP180 Chartplotter, that is able to be connected to radar. The manual says to connect a Sitex MD1 to the unit. I have a similar radar, that looks identical. It is a JRC 1000. I'm wondering if the units are similar enough to use the JRC unit instead. This would save me over $1000. I've looked at the information on the 2 units online, and the specifications look very similar. Can you advise?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-