Connect with us

Charging station

Discussion in 'General Electronics Discussion' started by Keung0726, Nov 26, 2016.

Scroll to continue with content
  1. Keung0726

    Keung0726

    1
    0
    Nov 26, 2016
    I am going to develop a charging station for 60 iPads together.
    Those iPads are constructed in parallel.
    For 1 iPads, the required current and voltage is 2.4A and 5V respectively.
    However, The supply voltage is 28VDC only....
    Is it work in this situation?
    If it works, I know that I need a converter for convert the voltage from 28v to 5v, and the RLC circuit, also the relay for preventing the overcurrent.
    Some of my friends told me that the current control current source can help me.

    Anyone can give me what I have to concern, please, or how to deal with this problem?

    Many thanks,
    A new from electronic..
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-