Maker Pro
Maker Pro

Change the speed of ac motor .

nassimback

Sep 23, 2016
2
Joined
Sep 23, 2016
Messages
2
Hi i'm new here and i'm only 2nd yeah of study of electronics....anyway i would like to know if it's possible to change the speed of an ac motor without a tachogenerator ,
just some ideas of yours to help me get inside electronic world :) Thanks
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
Depends on the type of AC motor, single phase induction motors do not control well, with the exception of small fans or motors that are shaded pole type, i.e. no capacitor.
For these a Triac Dimmer style will work.
3 phase motor do control well however with the aid of a VFD etc.
M.
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
Incidentally, the 3 phase motor can be driven by a 1ph supply to the VFD, usually up to around 5hp.
M.
 

Bluejets

Oct 5, 2014
6,927
Joined
Oct 5, 2014
Messages
6,927
It's a series motor...look for triac phase angle controller.

There was discussion on one of the above not so long ago ( commercially available)
Plug in unit up to around 10a load if I remember correctly.
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
The link does not work for me, but if in fact it is a Universal motor (has brushes) then the the triac type controller should work for it.
Google triac motor controller.
M.
 
Top