Maker Pro
Maker Pro

Chamfered micro USB socket

Olly

Jan 14, 2017
4
Joined
Jan 14, 2017
Messages
4
hi, first post, I'd like to try and repair a tablet but I'm struggling to find a supplier for the micro USB socket. It's chamfered at the entrance to fit the sloping side of the tablet shell. I guess about 45 degrees maybe a bit less.
Any ideas where I could get one from please? I'm in the UK
 

davenn

Moderator
Sep 5, 2009
14,260
Joined
Sep 5, 2009
Messages
14,260
hi, first post, I'd like to try and repair a tablet but I'm struggling to find a supplier for the micro USB socket. It's chamfered at the entrance to fit the sloping side of the tablet shell. I guess about 45 degrees maybe a bit less.
Any ideas where I could get one from please? I'm in the UK

hi
welcome :)

show us a photo ... there are several mini USB types
 

Alec_t

Jul 7, 2015
3,590
Joined
Jul 7, 2015
Messages
3,590
Do you know for sure that the socket itself (rather than a pcb track) is damaged?
At a pinch perhaps you could file down a standard socket.
 

davenn

Moderator
Sep 5, 2009
14,260
Joined
Sep 5, 2009
Messages
14,260

Olly

Jan 14, 2017
4
Joined
Jan 14, 2017
Messages
4
It's the socket - I watched her jam the plug in upside down :eek: and snap the plastic tang off.
I can't see any on the Farnell site, will try the other two now.
Filing a standard one down would at least mean I'm sure to get the right angle - could well go that route.
 
Top