Connect with us

CD spindle motors (Mabuchi)

Discussion in 'Electronic Repair' started by Sidney, Mar 4, 2005.

Scroll to continue with content
  1. Sidney

    Sidney Guest

    I need OEM part #'s for Mabuchi 5.9v DC motor generic # RF-300S-12350:

    shaft length=12 mm/0.47" (a longer length is fine as I can cut it)
    motor height=12mm/0.47"
    motor diameter=24mm/0/94"

    as this is a spindle motor out of a JVC dvd player
    model:XV-523GD,year:2001 and JVC lists it as an assembly with the
    spindle disc which has a reel counter underneath it and the plastic
    housing with a photo-interrupter but JVC wants $52 for the whole thing
    as the motor is not sold separately, I tried lubing it and running it
    on my power supply at a slightly higher voltage but it still has bad
    spots.
    I can replace the motor alone I just need OEM part #'s for it as PRB
    Belt co and other electronic parts suppliers list the bigger standard
    sized RF-310T-XXXX series motors but not this smaller one. For your
    info the JVC spindle motor assembly part # is:

    JVC old # VDG1099001TSVME
    JVC new # FXL-V6SPSV-2C

    I can measure the spindle disc height of old motor prior to replacing.
    Thanks in advance for help/replies.

    Sidney
    E-mail:
    Dartmouth, Nova Scotia
    Canada
     
  2. Jerry G.

    Jerry G. Guest

    You are best to find an old scrapper player like the one you have, and take
    a chance of the motor is okay. I have had these go defective before.
    Sometimes the one from the scrapper is also bad.

    --

    Jerry G.
    ======


    I need OEM part #'s for Mabuchi 5.9v DC motor generic # RF-300S-12350:

    shaft length=12 mm/0.47" (a longer length is fine as I can cut it)
    motor height=12mm/0.47"
    motor diameter=24mm/0/94"

    as this is a spindle motor out of a JVC dvd player
    model:XV-523GD,year:2001 and JVC lists it as an assembly with the
    spindle disc which has a reel counter underneath it and the plastic
    housing with a photo-interrupter but JVC wants $52 for the whole thing
    as the motor is not sold separately, I tried lubing it and running it
    on my power supply at a slightly higher voltage but it still has bad
    spots.
    I can replace the motor alone I just need OEM part #'s for it as PRB
    Belt co and other electronic parts suppliers list the bigger standard
    sized RF-310T-XXXX series motors but not this smaller one. For your
    info the JVC spindle motor assembly part # is:

    JVC old # VDG1099001TSVME
    JVC new # FXL-V6SPSV-2C

    I can measure the spindle disc height of old motor prior to replacing.
    Thanks in advance for help/replies.

    Sidney
    E-mail:
    Dartmouth, Nova Scotia
    Canada
     
  3. Tim Schwartz

    Tim Schwartz Guest

    Hi,

    MCM Electronics (www.mcmelectronics.com) has several of these in their
    catalog at around $5USD each, though they might be catalogued as
    cassette motors for some reason.

    Regards,
    Tim Schwartz
    Bristol Electronics
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-