Connect with us

CCD Wiring Diagram?

Discussion in 'Security Alarms' started by Tim, Jan 25, 2004.

Scroll to continue with content
  1. Tim

    Tim Guest

    Not sure if this is the right place to post this but here goes. I have a
    PHILIPS VS23645P B/W Quad Real Time Observation System with one camera. I
    need to move the quad to a new location and add three more cameras. I was
    not the original installer of this system. It was wired from the camera
    about 50' away with a 22/4 and then spliced into what looks like a RJ45
    connector that plugs into the quad. Does anyone know the layout of this plug
    (power, ground, video and audio) or an online manual that may help me. I've
    searched the net with no luck. Thanks for any help. Tim
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day