S
Sebasto
- Jan 1, 1970
- 0
Hello
I've problem with calibration. After calibration both in RX and TX mode
CAL_COMPLETE bit is set, but LOCK_CONTINUOUS is still low. That is mean
calibration fail, but I dont know why. What is wrong ? Any sugestion ?
regards
Sebasto
I've problem with calibration. After calibration both in RX and TX mode
CAL_COMPLETE bit is set, but LOCK_CONTINUOUS is still low. That is mean
calibration fail, but I dont know why. What is wrong ? Any sugestion ?
regards
Sebasto