Connect with us

Case study- High frequency electronics: Signals,sensors and electronic interfaces to ADC

Discussion in 'Electronics Homework Help' started by *Greig*elektrified, Aug 22, 2016.

Scroll to continue with content
  1. *Greig*elektrified


    Aug 22, 2016

    The above mentioned heading is my case study topic.. the problem I have with this is in knowing what exactly the lecturer is expecting me to write.
    Should I write about an ADC that uses Signals, sensors and electronic interfaces? If so can I have an example of such an ADC.
    or I'm not sure if they are asking individually about Signals, sensors and electronic interfaces in comparison to ADC.

    What are High frequency semiconductors and microwaves belong to this category?

    PS: Once I am clear with the topic I can begin my work on this case study. so your clarification and help in this regard is much appreciated as my lecturer is not being much responsive.
  2. davenn

    davenn Moderator

    Sep 5, 2009

    hi welcome

    and unfortunately none of us here have any idea what your lecturer wants
    what about your class mates ?

  3. *Greig*elektrified


    Aug 22, 2016
    We all have a different topic. That's what makes it worse
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day