Maker Pro
Maker Pro

Carver schematic or TC9147BP data sheet

R

Rich Andrews

Jan 1, 1970
0
I need either the schematic for a Carver "The Receiver" (what a ridiculous
way to indentify something) or a data sheet for a TC9147BP IC. The symptoms
are that the AM/FM/AUX buttons will enable to the receiver to work, but they
don't "latch". IOW, one has to hold in the button for it to play. It
appears that the switches interface directly to the chip, but I wanted to be
sure before I order a replacement IC. It could be something else altogether
that is causing the switches not to latch as well.

TIA

r
 
M

Mark D. Zacharias

Jan 1, 1970
0
You could probably do a Google search for "TC9147BP PDF" or some such. I
find lots of PDF's that way.

Mark Z.
 
Top