Connect with us

Cant reply ??

Discussion in 'Introductions' started by mr fixit, Jun 24, 2013.

Scroll to continue with content
  1. mr fixit

    mr fixit

    Jun 23, 2013
    Hi Guys.

    Firstly, introductions.

    Me - 44 year IT Engineer. THat's 44 years WORKING.

    I repair pretty much anything I find broken. Great challenge. All stuff I fix has ben deemed unrepairable by thos ethat get paid to fix it.

    I just repaired (sort of...) my Mother-In-law's Bamix blender.
    I wanted to thank the guy who posted the trick to removing the bottom flange, on here, but alas! I cant reply??

  2. davenn

    davenn Moderator

    Sep 5, 2009
    Hi Jeff

    welcome to the forums :)

    that's other forum place you mentioned for this mixer repair appears to be in the
    newsgroups section and dated way back in 2006

    being so old those people may not event be around anymore, so don't panic too much

    But if you want to post in here the trick you found that would be cool :)
    and I will move that bit off to the forum repair section

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Electronics Point Logo
Continue to site
Quote of the day