Connect with us

Canon Powershot S2 part?

Discussion in 'Electronic Repair' started by greolt, Apr 11, 2006.

Scroll to continue with content
  1. greolt

    greolt Guest

    Canon Powershot S2 S part needed. New or second hand.

    Main Board is what I need. It has had some water ingress and subsequent
    damage.

    I am in Melb. (or nearby at least)

    This is my sons camera and I have no peviouse experience
    fixing cameras so don't know where to source this part,

    Any help would be very much appreciated, Thanks
     
  2. JANA

    JANA Guest

    The source is Canon only, unless you can find a scrap camera of the exact
    same model that has the same series of board. Canon may not sell the parts
    or service information to unauthorised service people. If you change the
    board, and any adjustments are needed, you would not have the equipment,
    software, jigs, or facilities to do the adjustments.

    --

    JANA
    _____


    Canon Powershot S2 S part needed. New or second hand.

    Main Board is what I need. It has had some water ingress and subsequent
    damage.

    I am in Melb. (or nearby at least)

    This is my sons camera and I have no peviouse experience
    fixing cameras so don't know where to source this part,

    Any help would be very much appreciated, Thanks
     
  3. greolt

    greolt Guest

    Thanks for the advise JANA

    If I cannot locate a scrap camera it sounds as if it may just not be
    worth pursuing.

    Greolt
     
  4. Mark M

    Mark M Guest

    Even if it's a non-warranty repair, it's likely worth the cost of having
    Canon fix it.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-