Connect with us

Canon iP4000 Power Supply Problem

Discussion in 'Electronic Repair' started by Brian, Mar 22, 2007.

Scroll to continue with content
  1. Brian

    Brian Guest

    I'm having a problem with a Canon printer not powering up. I have the power
    supply out and the primary side of the switch mode PS is fine and the 12v
    line has 12 volts on the secondary side, does anyone know what the other
    pinout voltages should be? Are the any common problems with these power
    supplies? (The board has 2 numbers on it, PS-A125 and P1221)

    -Brian
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-