Canadian suppliers of short-run PCBs?

[Kim]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

 

[rwiehler]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The
board that I require will be approx 3x3in, with holes drilled, NO
masking or silk screening required.
Thanks,
Kim

in the GTA?
there are about 30 manufactures here

 

[dragon]

Try Dyco Circuits in Richmond, BC

 

[Quack]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

I use online services.
I previously used PCB123.com, but their price and the quality of their
software are both not too great.

I then tried out pad2pad.com for a few orders (same company as
emachineshop.com), and their price was great and their software many
times better than the buggy pcb123.

The above board you mention should be under $5 a piece (including
shipping) at 50qty. thats hard to beat!

Alex.