Connect with us

Canadian PCB Suppliers, approx. 50 boards

Discussion in 'Electronic Design' started by Kim, Nov 5, 2004.

Scroll to continue with content
  1. Kim

    Kim Guest

    Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
    that I require will be approx 3x3in, with holes drilled, NO masking or silk
    screening required.
    Thanks,
    Kim
     
  2. John Smith

    John Smith Guest

    Try to see if they fit your needs. They are on the Left Coast
    of Canada. Their Web page (if you can call it that) is http://www.1pcb.com/

    If your traces are small (10 mils) they will use their Shanghai facility but
    they might still get your boards to you in a week. Boards with larger traces
    are made in Canada, I think.

    My only connection with them is as a client.

    John
     
  3. John Larkin

    John Larkin Guest

    AP Circuits, Alberta I think. They just did a nice proto for us, about
    as you describe, in 2 days. I don't think they've ever made a bad
    board for us.

    John
     
  4. Greg Neff

    Greg Neff Guest

    http://www.crestcircuit.com/crestmain.html

    ================================

    Greg Neff
    VP Engineering
    *Microsym* Computers Inc.
     
  5. 50 boards 3x3 inch double sided, 10 working days, 242.59 euro (~US$310)
    including shipping. Including mask & silkscreen, routing.
    www.eurocircuits.com,
    see online calculator 'verified' to play with various options. Quality is
    superb. I use them very often.
     
  6. Rob Paisley

    Rob Paisley Guest

    ---------------------

    Two services that I have used with good results.

    http://www.lktronics.com/

    http://www.circuit-spec.com/

    Rob.

    ------------------
     
  7. Gary Lecomte

    Gary Lecomte Guest

    I am not a commerical manufacturer, But I could possibly do those
    boards for you. However I would need to see some artwork first.

    E-mails to me MUST CONTAIN the word "Electronic" in the Subject Line.

    I could also do a Free Sample for you.

    Take care......Gary
    ****************************************************************************
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-