Connect with us

Can i Erase last digit on the LCD screen? *I am a total newbie*

Discussion in 'General Electronics Discussion' started by yomastoz, Mar 10, 2016.

Scroll to continue with content
  1. yomastoz


    Feb 9, 2016

    I kinda don't know how this closc works, but i have some ideas.
    The question is, how can i erase the last minute digit (That it won't be shown on display ever again).

  2. dorke


    Jun 20, 2015
    Simplest solution, non destructive and reversible:
    Put a sticker on it...;)
    Last edited by a moderator: Mar 10, 2016
    Arouse1973 likes this.
  3. yomastoz


    Feb 9, 2016
    I wanted to do it, i want it to remain number 1 all the time, so i thought if i could erase it an then add number 1 sticker on it.
    If i do it while it is still working, then there is no point. :)
    Last edited by a moderator: Mar 10, 2016
  4. davenn

    davenn Moderator

    Sep 5, 2009
    that didn't really make sense

    you have better explain more clearly what you are trying to achieve and why
  5. Gryd3


    Jun 25, 2014
    4 x 7 Segments.
    Are there any other symbols or items on the screen that turn on?
    You do realize this uses hardly any current and should just be left alone.

    Best case, you cut one wire to disable that position... worst case, you cut the wrong one and the whole thing dies or one of the 7 segments on EACH one of the positions will no longer work.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day