Connect with us

can any one tell me the components need for weigh scale

Discussion in 'Electronic Design' started by joshua, Feb 17, 2006.

Scroll to continue with content
  1. joshua

    joshua Guest

    can any one tell me the components need for weigh scale

    Regards,
    T.Joshua
     
  2. Paul Burke

    Paul Burke Guest

    1 beam with a hole in the middle and one at each end.
    2 hooks hang off the end holes
    1 piece of string to go through the middle hole.
    A couple of equal sized dishes with handles to hang on the hooks.
    A set of pebbles of agreed weight (who do you agree with? That's up to you).

    This system proved quite satisfactory from about 5000BC to 1800AD.

    Paul Burke
     
  3. joshua

    joshua Guest

    nice answer.
     
  4. Fred Bloggs

    Fred Bloggs Guest

    Go to any strain gauge manufacturer website and you will find many
    application examples of "weigh" scales.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-