Connect with us

can any body give me.....

Discussion in 'General Electronics Discussion' started by comasus, Aug 15, 2009.

Scroll to continue with content
  1. comasus

    comasus

    1
    0
    Aug 15, 2009
    can any body give me the circuit diagram for converting 12v to 6v

    tell me what are the parts needed

    Advance Thanks
     
  2. Resqueline

    Resqueline

    2,848
    2
    Jul 31, 2009
    You need 2 resistors of equal resistance, connected in series, resistance => 150 Ohms.
    But seriously, you'll have to be a bit more specific as to the environment, + power & efficiency level wanted..
     
  3. ElectronWorks

    ElectronWorks

    28
    0
    Aug 20, 2009
    we sell a kit that does exactly this. 12V input, 5V output (although I can modify it to give 6V output) 500mA. Is this of use? see my username for a clue as to the web site address!. Let me know and I will modify one for you

    Bill
    Electronworks Ltd - electronic kits for education and fun
     
  4. RatShack

    RatShack

    6
    0
    Aug 11, 2009
    a LM317 and some resistors and perhaps a couple of smoothing capacitors will do nicely for this as well. but if your not up for doing this perhaps you should hit bill up and have him take care of you.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-