Connect with us

Cadsoft Eagle 5.5 No Library

Discussion in 'Electronic Basics' started by goodfella, Apr 18, 2009.

Scroll to continue with content
  1. goodfella

    goodfella Guest

    I have 5.5 installed on both my home and laptop computers. I have a
    circuit that is complete and touched up the board from that circuit on
    my laptop. Then I copied the board file to a memory stick and took it
    home. Then I copied the brd file onto my home computer and did some
    more touch up without touching the schematic (although it was open to
    keep the files synced. Today, when I tried to add a component, the
    library is completely blank. I went to options and made sure the
    library was available. I have 5.3 and 5.4 still installed on my
    computer. Has this happened to anyone else and what is the fix.
  2. goodfella

    goodfella Guest

    What kind of beer? :cool: I would be happy to buy you a beer if I were
    close enough. What version of Eagle did this start in? I I never had
    this happen in version in 4.whatever.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day