Connect with us

Cadence Spectre Save issue

Discussion in 'Electronic Design' started by abulnk, Jul 18, 2006.

Scroll to continue with content
  1. abulnk

    abulnk Guest

    Hi everyone,

    This is my first posting here.

    I have a question for those who have used cadence spectre outside the
    ADE environment. I am running spectremdl on a spectre netlist. Now I
    want to be able to save the differences between two node voltages and
    view the graphical plot from the *raw file. I know how to view plots
    when I save a single voltage or a current, but I am unable to calculate
    (say) the differences between two voltages. Any suggestion will be
  2. leshington

    leshington Guest

    I think you need to connect your overhead camshaft belt to the
    variating sprocket diode. Then lick your finger and hold it on the
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day