Connect with us

Cadence Allegro SBP15.5 - Exporting Gerbers

Discussion in 'CAD' started by [email protected], Feb 14, 2006.

Scroll to continue with content
  1. Guest

    When I export the Gerbers using the post-processer, I find that some
    layers are exported with incorrect information.

    After a little digging I realized that the contents of the layers
    listed in the post process settings spreadsheet do not correspond to
    the actual layout. I can see this by right clicking on the post process
    settings spreadsheet and selecting 'preview'.

    A couple of the signal layers previewed actually duplicate the bottom
    layer and the proper contents are nowhere to be found.

    This really has me stuck and I would be very grateful for any tips as
    to how to fix this.

    Thanks

    Chris Wilkinson
     
  2. Chris,
    Give Cadence a call on this one. I don't know the answer to this, but
    the experts there can get you on the right track pretty quickly..

    Charlie
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-