Connect with us

CAD

Discussion in 'Electronic Basics' started by Richard, Sep 17, 2004.

Scroll to continue with content
  1. Richard

    Richard Guest

    Does anyone know where I can find a cad DB Connector Library. We are trying
    to design a small chassis and we are looking for premade DB9 and DB25
    connector drawings.
     
  2. Sporkman

    Sporkman Guest

    Waddayaneed? You want 2D DXF data? 3D IGES data? Schematic
    symbology? When you're clear in your question you're more likely to get
    a clear answer. I can provide some of the first two (if you contact me
    directly). But you'll have to specify what you want. There's thru-hole
    PCB mount (both right angle and straight), there's surface mount (again,
    right angle and straight), there's soldercup (straight), there's male
    and female of each, and that's just to start.

    Either unMUNGE my email address in the header or visit my Web site for a
    good email address.

    Mark 'Sporky' Stapleton
    Watermark Design, LLC
    www.h2omarkdesign.com
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-