Connect with us

CAD Program

Reply to Thread

Discussion in 'Electronic Basics' started by Raul, Dec 17, 2004.

Scroll to continue with content
  1. Dec 17, 2004 #1
    Raul

    Raul Guest

    Is there a relatively easy CAD program. I need to model some 3d shapes
    so I can see how they fit together. I've been using a graphics program
    named Bryce but it does not do well with multiple objects assembled
    together, ie: you can't tell it something is a tube. You have to make
    the shape then negatively intersect it with another shape to make a
    tube. I'm not an engineer, I just need to see how things will fit
    together at certain sizes.
    Thanks, Raul
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CAD program.

  2. CAD program recommendation

  3. Wanted: CAD program pack

  4. Cad Program for Schematics?

  5. CAD program origin points?

  6. Feedback requested on Target3001 CAD Program

  7. Measure impedance with spice cad program?

  8. CAD

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-