Connect with us


Discussion in 'Hobby Electronics' started by eltan, Mar 23, 2005.

Scroll to continue with content
  1. eltan

    eltan Guest

    Hi all,

    Is it by law that any, and all electronics goods, such as mobile phone to be


  2. Chris

    Chris Guest

  3. The mark that applies to mobile telephones is the A-tick (C-tick for the
    charger only). For mobile telephones this mark covers the following
    regulatory frameworks (the links point to information):

    For the battery charger:

    For the GSM or CDMA air interface

    For the human health effects of electromagnetic radiation:

    The phone must also meet the disability standard - the marking regulations
    do not refer to this hidden, but nonetheless mandatory requirement. In
    short, for a CMT you need a 0.4 mm raised pip on or near the digit 5.

    Additionally the battery charger must also be approved by one of the state
    electrical regulators and marked with the approval number or RCM mark (Qld
    given in the example below)
  4. eltan

    eltan Guest

    thanks, was told by ACCC & consumer affair that a-tick & c-tick is not
    required by law.

    "David, not to be confused with all the other Davids."
  5. That's probably correct, under the "laws" they administer the A-tick and C-tick
    probably aren't required.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day