Connect with us

Bypass light control in ceiling fan?

Discussion in 'Troubleshooting and Repair' started by jrd22, Dec 22, 2020.

Scroll to continue with content
  1. jrd22


    Dec 22, 2020
    Hunter ceiling fan with three light fixtures. The lights quit working, fan works fine. The replacement wiring harness is no longer available (9 years old). I eliminated the electronic control box in the fixture and the lights work, but I'm concerned about safety. Not sure what the control was in there for, anyone know if eliminating it is a bad idea. Can't seem to get a picture to load here, the box is labled "Hunter EBL Intertek model 99245X part #99245-03"
  2. Bluejets


    Oct 5, 2014
    If the control box is approx. 6" x 3" x 2" high, then it is a remote control add on.
  3. jrd22


    Dec 22, 2020
    Thanks but it's only about 1" X 2" X 1.5" with 4 wires (2 neutral/common, 1 power in and 1 power out).
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day