Connect with us

Business Cards

Discussion in 'General Electronics Discussion' started by biferi, Feb 25, 2017.

Scroll to continue with content
  1. biferi


    Oct 12, 2016
    I am a Computer Graphic Artist and a Computer Repair Tech.

    I got the Avery Blank Business Cards and made my own Business Cards.
    And then I go to Rip them apart they do not look very Clean and good.

    So I try useing Photo Paper and I used a Paper Cutter.
    And they still looked very bad.

    I have a Photo Printer and I wanted to know whare can I Buy the Blank Business Cards that say Staples gives you if you go to them to have Business Cards Printed?

  2. Harald Kapp

    Harald Kapp Moderator Moderator

    Nov 17, 2011
    Printing on single blank business cards is a challenge for the average printer. They are usually not designed to print on such small a format.
    Here's a wide selection of letter sized blanks. The microperforated type should give clean edges after separation (as should the Averys have given).
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    Another option is to print them on card of a suitable sure and to use a laser cutter to cut them.

    A sufficiently high power laser cutter will cut the paper with minimal discoloration.

    Where to find a laser cutter? Do you have a local hackerspace (aka makerspace). They may have one.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day