Connect with us

Building Hand Held Game Question

Discussion in 'Electronic Basics' started by jm, Oct 4, 2004.

Scroll to continue with content
  1. jm

    jm Guest

    Not sure if this is the right place for this, but does anyone have any good
    links on how to build a hand held game? Like the small ones in Wal-Mart? I
    am a programmer and I believe I could program a microprocessor to carry out
    instructions, but just curious about the hardware part (I find the hardware
    part more interesting, actually.) Big project, I know, but thought I'd ask.

  2. Dingo

    Dingo Guest

    Start here:

    Then you'll need to use a graphic LCD as a screen
    Also look here:

    Basically you will you a microcontroller (microprocessor with onboard memory
    and other stuff)
    Maybe a little extra ram so an external chip would be required. Graphic will
    be the most expensive and complicated piece of equipment used.

    Also join the piclist (google for yahoo group called piclist) and check out
    avrfreaks (above)

    It will take you a long time to finish it and you'll probably either code in
    Microchip assembler or C using AVRs. It will take you longer if you don't
    know C already

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day