Connect with us

Building a circuit without a pcb

Discussion in 'Electronic Basics' started by Pete, Apr 9, 2004.

Scroll to continue with content
  1. Pete

    Pete Guest

    I have drawn a schematic for a circuit, but am having difficulty in
    converting it to a board layout using stripboard rather than producing a
    pcb.

    There are several pieces of software out there that can convert from
    schematic to pcb - but not to a stripboard layout.

    The use of the opamps seems to complicate matters with not using a pcb.

    Does anyone know of any software to help - or give me some pointers on the
    board layout.

    i have posted the schematic in alt.binaries.schematics.electronics.

    thanks in advance!
     
  2. Pete

    Pete Guest

    Thanks for the link!

    Just what I am looking for. I would have expected more programes around like
    this, and not be hard to find link stripboard magic.
     
  3. Paul_Morphy

    Paul_Morphy Guest

  4. Hi,
    Sorry about that - they were both up and running when I
    posted them.


    Cheers - Joe
     
  5. Rich Grise

    Rich Grise Guest

    When you posted them, did they have that ellipsis in the middle?
     
  6. cpemma

    cpemma Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-