Connect with us

brown-out condition

Discussion in 'Electronic Basics' started by Soon Heng, Jun 25, 2004.

Scroll to continue with content
  1. Soon Heng

    Soon Heng Guest

    Dear all,

    There is a specification on FM1808 FRAM chip that "Anytime that the power to
    the device (VDD) drops below 4.0V, the power supply must be taken to 0volts
    (+/-0.1V) for a minimum of 1us before power is restored to the device. It is
    recommended that the VDD pin be actively to ground through a low impedance
    path to ensure reliable power-up operation".

    Please advise on simple circuitry/components recommendation. Thanks!

    Best Regards,

    Soon Heng
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-