Connect with us

Bose Wave Radio/CD problem

Discussion in 'Datasheets, Manuals and Component Identification' started by larryhhill, Nov 15, 2010.

Scroll to continue with content
  1. larryhhill


    Nov 15, 2010
    I acquired a Bose Wave Radio/CD AWRC1G that was plugged into a improper power source
    and blew out one or more components and does not operate when it it plugged in and the power switch is turned on. I checked and found that the fuse is not blown. All I want is to
    find out how I can acquire a schematic diagram for this model. Thank you.
  2. barathbushan


    Sep 26, 2009
    hi larry ,

    what do you mean by an improper source , improper voltage or frequency ???

    if the fuse is not blown , it only means that a high current has not passed through the fuse
    and nothing else

    my guess is most probably a transformer failure
    if nothing switches on , not even an led , then i have guessed right .
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    My guess is that your guess is a very bold one, however the question you asked ("what do you mean by an improper source , improper voltage or frequency?") is certainly reasonable.

    Googling the device in question, I can only imagine it was a 110V unit connected to 220V?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day