Connect with us

Bose mie2i earphone solder repair.

Discussion in 'Troubleshooting and Repair' started by Stujlmbrt, Jun 16, 2013.

Scroll to continue with content
  1. Stujlmbrt


    Jun 16, 2013
    Bose mie2i earphone solder repair.


    Please help!!!

    I need good simple advise from a professional on how to solder the thin two core speaker wires back into earphone speaker as excessive force had caused cable to pull out and become detached from earphone.
    Please see photo!!
    Any further information required please let me know.

  2. RxyzM


    Jul 21, 2011
    Since these are BOSE headphones, I would first suggest to check with BOSE center for repairs.

    If that is not possible or not an option, then, I presume you know how to solder. And, also presume that you know how to use multimeter.

    Using Multimeter, please check that the spot marked under RED ink and the one next to it are showing 0 (zero) ohm resistance. Similarly, confirm that the the opposite spots also are showing 0 (zero) ohm resistance.

    From the picture, it seems that the copper color wire has separated from the spot marked under RED ink/compound. So, connect copper color wire to this spot.

    The silver color wire gets soldered to opposite spot to the one marked by red ink/compound.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day