Connect with us

Bose AWRC3G Service Manual

Discussion in 'Datasheets, Manuals and Component Identification' started by nescom, Mar 20, 2013.

Scroll to continue with content
  1. nescom

    nescom

    2
    0
    Mar 20, 2013
    Hi, I have a bose Wave Radio CD system, model no. AWRC3G, that has a burnt out resistor that I am unable to find any values on.

    The resistor that has burnt out comes off of Q501 and seems to be the 5v line to the LA6541 bridge driver IC.

    Was wondering if anyone had any info on this, perhaps a service manual or schematics of the pcb.

    The part number on the pcb is 260128-0002.

    I have attached photos of the pcb and the location of where the resistor has burnt.

    Any help would be greatly appreciated.
     

    Attached Files:

  2. davenn

    davenn Moderator

    13,657
    1,888
    Sep 5, 2009
    did you take the resistor off ?

    if so have you actually tried to measure the value of that resistor ?

    Dave
     
  3. nescom

    nescom

    2
    0
    Mar 20, 2013
    Hi Dave,

    Thanks for the reply. Yeah, the resistor has been removed.

    Good point, will try and get a measurement off of the old one.

    Cheers
     
  4. Plato

    Plato

    1
    0
    Apr 28, 2013
    It's R565, a 10ohm collector resistor for Q201.
     
  5. superstockracer

    superstockracer

    1
    0
    Feb 6, 2014
    Sanyo Laser transport solder link

    My resistor burnt out and needed replacing. The reason it burnt out is that I needed to remove a "transport solder link" on the replacement Sanyo Laser.
    I removed it and replaced the resistor and all is well.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-