Connect with us

boost pressure 12volt rheostat?

Discussion in 'General Electronics Discussion' started by jk080, Sep 28, 2011.

Scroll to continue with content
  1. jk080

    jk080

    1
    0
    Sep 27, 2011
    I have a customer that I installed some gauges in there F250, he has red LED lights under the cowl hood that can be seen when inside the truck. He wanted to know if it was possible to have these light glow dim or off at low boost (under 5psi) and glow bright at around 20 to 25psi of boost, so the lights would follow the boost pressure.

    I am not sure if someone makes a sensor that can be installed inline with the boost gauge that can work these lights that way.

    Any help or ideas would be appreciated, I told him I would look into it but didn't commit to anything.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-