Connect with us

Bluetooth integration into existing car stereo

Discussion in 'Radio and Wireless' started by iggysmartbomb, Jun 30, 2013.

Scroll to continue with content
  1. iggysmartbomb

    iggysmartbomb

    1
    0
    Jun 30, 2013
    I got the idea from this project I found - http://roofus.me/post/14200436365/tape-deck-a2dp-conversion - and I'm looking to adapt it to make it something that would be doable within my own car stereo. The biggest difference between mine and his is the lack of a tape deck, I think, but it has an extra AUX port so I think I can probably just substitute that. I guess my biggest question would be what bluetooth module would be best suited for something like this? In his project, he just used an old bluetooth receiver he had lying around from what I can tell, but I wanna make it a little bit cleaner if at all possible. Any ideas, suggestions, or comments?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-