Connect with us

Blown Toshiba PCX2500 cable modem

Discussion in 'Troubleshooting and Repair' started by voodooutt, Dec 16, 2009.

  1. voodooutt

    voodooutt

    6
    0
    Dec 16, 2009
    I'm hoping this modem is salvageable. I grabbed the wrong A/C adapter and proceeded to plug it in. The lights just did a quick blink and I heard a faint "zap". then it was dead. I did not smell any burnt electronics either.

    The proper A/C adapter is a 120-60Hz to 12vDC 1000mA - the one i used is 24VAC 1300mA

    they both look the same, only the labels are different, I'm a little pi$$ed at myself lol...

    I dont have a multimeter handy either, just off the top of anyones head, what would be the blown component? a simple capacitor?

    thanks...
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-